Makita UB400MP Original Instruction Manual

Also see for UB400MP: Original instruction manual Original instruction manual

8 ENGLISHBattery tool use and care1. Recharge only with the charger specified bythe manufacturer. A charger that is suitable forone type of battery pack may create a risk of firewhen used with another battery pack.2. Use power tools only with specifically desig-nated battery packs. Use of any other batterypacks may create a risk of injury and fire.3. When battery pack is not in use, keep it awayfrom other metal objects, like paper clips,coins, keys, nails, screws or other small metalobjects, that can make a connection from oneterminal to another. Shorting the battery termi-nals together may cause burns or a fire.4. Under abusive conditions, liquid may be ejectedfrom the battery; avoid contact. If contact acci-dentally occurs, flush with water. If liquid contactseyes, additionally seek medical help. Liquid ejectedfrom the battery may cause irritation or burns.5. Do not use a battery pack or tool that is dam-aged or modified. Damaged or modified batteriesmay exhibit unpredictable behaviour resulting infire, explosion or risk of injury.6. Do not expose a battery pack or tool to fire orexcessive temperature. Exposure to fire or tem-perature above 130 °C may cause explosion.7. Follow all charging instructions and do notcharge the battery pack or tool outside thetemperature range specified in the instruc-tions. Charging improperly or at temperaturesoutside the specified range may damage thebattery and increase the risk of fire.Electrical and battery safety1. Do not dispose of the battery(ies) in a fire.The cell may explode. Check with local codes forpossible special disposal instructions.2. Do not open or mutilate the battery(ies). Releasedelectrolyte is corrosive and may cause damage to theeyes or skin. It may be toxic if swallowed.3. Do not charge battery in rain, or in wet locations.4. Do not charge the battery outdoors.5. Do not handle charger, including charger plug,and charger terminals with wet hands.Service1. Have your power tool serviced by a qualifiedrepair person using only identical replacementparts. This will ensure that the safety of the powertool is maintained.2. Never service damaged battery packs. Serviceof battery packs should only be performed by themanufacturer or authorized service providers.First Aid1. In case of accident make sure that a first-aid box isavailable in the vicinity of the operations. Immediatelyreplace any item taken from the first aid box.2. When asking for help, give the following information:— Place of accident— What happened— Number of injured persons— Kind of injuries— Your nameSAVE THESE INSTRUCTIONS.WARNING: DO NOT let comfort or familiaritywith product (gained from repeated use) replacestrict adherence to safety rules for the subjectproduct.MISUSE or failure to follow the safety rules statedin this instruction manual may cause seriouspersonal injury.WARNING: Use of this product can createdust containing chemicals which may causerespiratory or other illnesses. Some examples ofthese chemicals are compounds found in pes-ticides, insecticides, fertilizers and herbicides.Your risk from these exposures varies, depend-ing on how often you do this type of work. Toreduce your exposure to these chemicals: workin a well ventilated area, and work with approvedsafety equipment, such as those dust masks thatare specially designed to filter out microscopicparticles.PARTS DESCRIPTION► Fig.3: 1. Cap 2. Pipe 3. Front nozzleASSEMBLYWARNING: Before assembling or adjustingthe equipment, switch off the motor or engine andremove the spark plug cap or battery cartridge.Otherwise, the fans may move and result in an injury.WARNING: When assembling or adjustingthe equipment, always put it down. Assembling oradjusting the equipment in an upright position mayresult in serious injury.WARNING: Follow the warnings and precau-tions in the chapter “SAFETY WARNINGS” andthe instruction manual of the power unit.Mounting the attachment pipeCAUTION: Always check that the attach-ment pipe is secured after installation. Improperinstallation may cause the attachment falling off fromthe power unit and cause personal injury.Mount the attachment pipe to the power unit.1. Remove the cap from the end of the pipe.► Fig.4: 1. Pipe 2. CapNOTICE: Do not dispose of the cap since thecap is necessary for storing the attachment.2. Turn the lever toward the attachment.► Fig.5: 1. Lever