Makita RP1801F Instruction Manual

Also see for RP1800: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

11Dust nozzle set (Accessory)12009878Use the dust nozzle for dust extraction. Install the dustnozzle on the tool base using the thumb screw so thatprotrusion on the dust nozzle fit to the notch in the toolbase.Then connect a vacuum cleaner to the dust nozzle.009877How to use screw M6 x 135 for adjusting thedepth of cutWhen using the tool with a router table available in themarket, using this screw allows an operator to obtain asmall amount of adjustment of the depth of cut fromabove the table.120099341. Installing the screw and washer on the tool• Attach flat washer onto this screw.• Insert this screw through a screw hole in the toolbase and then screw in the threaded part in themotor bracket of the tool.12009935100992912009930At this time, apply some grease or lubricating oil to theinside of the screw hole in the tool base and thethreaded part in the motor bracket.10099321. Inside of thescrew hole inthe tool base1. Screw M6x1352. Threaded part inthe motorbracket1. Hole1. Flat washer 62. Screw M6x1351. Flat washer 62. Screw M6x1351. Dust nozzle2. Clamping screw