12 ENGLISH4. Remove the water hose connector from the inletof the high pressure washer. After that, connect the filtercase to the inlet and then hose to the filter case.4312► 1. Inlet of the high pressure washer 2. Filter case3. Water hose connector 4. Hose5. Put the high pressure washer onto the container sothat it is secured with the mounts on the lid of the container.213► 1. High pressure washer 2. Lid 3. Air bleeding holeNOTICE: Pay attention to the handling of thecontainer when carrying. Carrying the containerwith high pressure washer and accessories or waterinside may cause accident or personal injury due toits own weight.NOTICE: When carrying the container, do notshake, turnover, or lean it excessively. Doing somay cause;— the water inside spilled out;— the high pressure washer on the lid dropped offfrom the container or;— the rotation of the container's wheels hindered.NOTICE: When carrying the container by thehandle, water may spill out if there is plenty ofwater inside.NOTICE: Water may come out from the airbleeding hole if the water inside reaches to the airbleeding hole by tilting the container.NOTICE: Do not step on the container. The lidmay be broken.NOTICE: Do not leave the container filled withwater for a long time. Doing so may cause the con-tainer damaged and result in water leakage.After use, follow the procedure below:1. Remove the cap on the drain outlet and dischargewater.1► 1. Drain outlet2. Wipe off the moisture inside of the container usinga cloth and then dry the container completely.NOTICE: Do not store the high pressure washerand the accessories while the inside of the con-tainer is wet. Remaining moisture may cause mal-function and rust.