Makita DCU602 Instruction Manual

Also see for DCU602: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

13 ENGLISH4. Place the bucket on the front pipe and left and right stays.Place the rubber washer on the hole of the bucket and insertthe bolt from the top. Attach the flat washer and spring washerin order to the bolt, and then tighten the nut from the bottom.Tighten the rest of the bolts and nuts in the same way.12345Fig.7► 1. Bolt 2. Rubber washer 3. Flat washer 4. Springwasher 5. Nut5. Securely tighten 4 bolts which were temporarilytightened in step 3.Removing the bucketTo remove the bucket, perform the installation proce-dure in reverse.Installing or removing the carrierOptional accessoryInstalling the carrier1. Take out the carrier from the box, and attach theside rails and front rail to the base frame.Fig.82. Tighten 6 thumb nuts together with springs andwashers to fix the rails.123Fig.9► 1. Thumb nut 2. Spring 3. Washer3. Place the carrier on the dump unit.Insert the bolt from the top. Attach the flat washer andspring washer in order to the bolt, and then tighten thenut from the bottom. Tighten the rest of the bolts andnuts in the same way.1234Fig.10► 1. Bolt 2. Flat washer 3. Spring washer 4. NutRemoving the carrierTo remove the carrier, perform the installation proce-dure in reverse.