Makita DCS 430 Owner's And Safety Manual

Also see for DCS 431: Spare parts Owner's and safety manual Instruction manual

Contents

Makita DCS 430 Owner's And Safety Manual Manual pdf 25 page image

Chain 085 (.325")Sharpening angle a 25"Front rake 60'- The file holder makes file guidance easier. It is marked forthe correct a sharpening angle (keep the marks parallelwith the chain when filing, see illustration)and limits the Cutdepth to the correct 4/5 of the file diameter. See 'Accesso-ries' for the order number.094.102 (38')30"05'Cleaning the guide barCAUTION:Protective gloves must be worn.Files and how to work with them-- Sharpen usinga special file holder with a saw chain roundfile:085 (.325')chain: File the first cutter half with a 4.5 mm dia.round saw-chain file. then switch to a 4 mm dia. file.- 094,102 (3/8')chain: Round saw-chain file 4.8 mm diam-eter.Normal round files are not appropriate for this work. See'Accessories' for the order number.- The file should cut only when pushed forwards (arrow). Liftthe file when leading it backwards.First sharpen the shortest cutter. The lengthof this cutter isthen the standerd for all other cutters of the chain.Always guide the file as in Fig. F shown.--- After having sharpened the-chain,the height of the depthlimiter must be checked by means of a chain gauge. See'Accessories' for the order number.Correct even the smallest excess height with a special flatfile (H).See 'Accessories" for the order number.Round off the front of the depth limiter (I)..--Regularly inspect the bearing surfaces of the guide bar fordamage, and clean them with a suitable tool.2!