Makita CG100D Instruction Manual

Also see for CG100D: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

11 ENGLISHNOTICE: Be sure to check the package for dam-age before installation. Using the damaged pack-age may cause malfunction.Installing film type package to holder1. Pull the rod handle backward slowly until it stops.1Fig.19► 1. Rod handle2. Insert the package into the holder.3. Attach the rubber ring, nozzle, and holder joint (asa cap). Fasten the holder joint (as a cap) firmly.14 235Fig.20► 1. Holder 2. Film package 3. Rubber ring 4. Nozzle5. Holder joint (as a cap)4. Push the rod gently until the piston touches thepackage.To remove the package, remove the holder joint (as acap), nozzle, rubber ring, and then push the rod handleforward until it stops.Direct filling1. Push the rod handle all the way until it stops.1Fig.21► 1. Rod handle2. Insert the tip of the holder into the caulking mate-rial, and then pull the rod handle slowly to fill the holderwith the caulking material.1Fig.22► 1. Holder3. Attach the rubber ring, nozzle, and holder joint (asa cap). Fasten the holder joint (as a cap) firmly.14 23Fig.23► 1. Holder 2. Rubber ring 3. Nozzle 4. Holder joint(as a cap)