Mahlkonig PEAK Operating Instructions Manual

Also see for PEAK: Operating instructions Original operating instructions

Contents

Mahlkonig PEAK Operating Instructions Manual Manual pdf 7 page image

H O R E C A | G A S T R O G R I N D E R75. SeT-UP anD baSIC aDjUSTmenTA grinding test run is carried out on each grinder in our factory.This is why you may find ground material residue in the grindingmechanism!You have received your grinder in operating condition. Now youonly need to mount the hopper and connect the grinder to themains plug. Proceed as follows.5.1 Usage locationPlace the grinder on a level, vibration-free surface.never operate the grinder in moist, or evenworse, in wet surroundings!5.2 mounting the hopper• Position the hopper, item 1, in the bayonet in the grinder´s lid.Note: The hole in the hopper-adapter has to line up with thelock screw, item 2, in the lid.• To lock the hopper grab the hopper with both hands and turn itclock-wise until it clicks in.• Secure the hopper with the lock screw, item 2, by using a allenwrench 2mm or in case of 100-120V-model use a screwdriver• Open the hopper slider, item 16, in the adapter.4. SafeTy DevICeS Of The GRInDeRThermal overload circuit breakerThe motor of the grinder is protected by a thermal overload circuitbreaker, which interrupts the motor´s electric circuit in the eventof electric overload. The trip switch, item 18, must be pressed toenable the grinder to be restarted.The user has no influence whatsoever on thesecircuit breakers. If the circuit breaker trips re-peatedly, an authorised service partner must beconsulted, as the motor´s winding may be dam-aged.Motor protectorThe winding of the motor is protected by a thermal switch (ther-mo pill / bimetall), which will trip when the motor heats up sig-nificantly. The grinder cannot be started again. Let it rest for appr.30 minutes. The thermal switch will reconnect the motor auto-matically.