Mahlkonig PEAK Operating Instructions Manual

Also see for PEAK: Operating instructions Original operating instructions

Contents

Mahlkonig PEAK Operating Instructions Manual Manual pdf 14 page image

H O R E C A | G A S T R O G R I N D E R14DefectThe grinder humsbut does not grind.The grinder doesnot grind, the dis-play is lit, single cupis pre-selected7. OPeRaTInG faUlTSCauseThe spout isclogged.Grinding is set toofine.A foreign objectis in the grindingmechanism.The grinding timeis set to 0.RemedySet grinding fineness to“coarse” and trigger thegrinding process. The grind-er will then grind itself free.Afterwards, return the set-ting to the desired grindingfineness.Turn the grinding fine-ness setting to the right,to “coarse”, and trigger thegrinding process. The grind-er will then grind itself free.Afterwards, return the set-ting to the desired grindingfineness.Clean the grinding mecha-nism as described and re-move the foreign object.Observe the safety instruc-tions!Reset the grinding time.DefectThe grinder doesnot start, the dis-play is not lit.In the case of other malfunctions or continued faults, please contactyour dealer or your authorised customer service centre.CauseThe main plug isnot inserted.The overload cir-cuit breaker hasbeen tripped.The pre-fuse hastripped.RemedyInsert the main plug intothe socket.Check to determine wheth-er the trip button of thecircuit breaker has jumpedout. Press the trip buttonin again if appropriate. Ifthe circuit breaker trips re-peatedly, contact your au-thorised customer servicecentre or dealer.Check the pre-fuse. Restorethe pre-fuse to its initialstate or replace it. Deter-mine whether other de-vices are connected to thisfuse.