Menu
Lenovo YOGA HOME 500 Maintenance Manual
                                                         |
Step 8. Disconnect all the cables from the related connectors, and separate the rear cover and the panel.Step 9. To reattach the rear cover:a. Line up the rear cover with the front bezel and reconnect all the cables.b. Line up the holes on the rear cover with mounting holes on the front bezel, and place the rearcover into position.c. Secure the rear cover to the front bezel with the two screws.d. Reattach the two rubber caps.Replacing a memory moduleAttention: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the rear cover.To replace a memory module:Step 1. Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operatingsystem, and turn off the computer and all attached devices.Step 2. Unplug all power cords from electrical outlets.Step 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)cables, and any other cables that are connected to the computer. Refer to “Left and right view”and “Rear view” for help with locating the various connectors.Step 4. Remove the rear cover. Refer to “Removing the rear cover”.Step 5. Disconnect the battery power cable from the connector on the motherboard.32 YOGA HOME 500 All-In-One PC Hardware Maintenance Manual |
Related manuals for Lenovo YOGA HOME 500
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved