OneStart

Menu
Lenovo YOGA HOME 500 Maintenance Manual Manual pdf 23 page image

Lenovo YOGA HOME 500 Maintenance Manual

Page 1 previewPage 2 previewPage 3 previewPage 4 previewPage 5 previewPage 6 previewPage 7 previewPage 8 previewPage 9 previewPage 10 previewPage 11 previewPage 12 previewPage 13 previewPage 14 previewPage 15 previewPage 16 previewPage 17 previewPage 18 previewPage 19 previewPage 20 previewPage 21 previewPage 22 previewPage 23 previewPage 24 previewPage 25 previewPage 26 previewPage 27 previewPage 28 previewPage 29 previewPage 30 previewPage 31 previewPage 32 previewPage 33 previewPage 34 previewPage 35 previewPage 36 previewPage 37 previewPage 38 previewPage 39 previewPage 40 previewPage 41 previewPage 42 previewPage 43 previewPage 44 previewPage 45 previewPage 46 previewPage 47 previewPage 48 previewPage 49 previewPage 50 previewPage 51 previewPage 52 previewPage 53 previewPage 54 previewPage 55 previewPage 56 previewPage 57 preview
Lenovo YOGA HOME 500 Maintenance Manual Manual pdf 23 page image
Selecting or changing the startup device sequenceTo view or permanently change the configured startup device sequence, do the following:1. Start the Lenovo BIOS Setup Utility program (see “Starting the Lenovo BIOS Setup Utility program” onpage 13).2. From the Lenovo BIOS Setup Utility program main menu, select the Startup option.3. Press the Enter key, and select the devices for the Primary Boot Sequence. Read the informationdisplayed on the right side of the screen.4. Use ↑ and ↓ arrows to select a device. Use the <+> or <-> keys to move a device up or down. Use the<×> key to exclude the device from or include the device in the boot sequence.5. Return to the Lenovo BIOS Setup Utility program menu and select the Exit option.6. Select Save Changes and Exit from the menu.Notes:a. If you do not want to save the settings, select Discard Changes and Exit from the menu.b. If you have changed these settings and want to return to the default settings, select Load OptimalDefaults from the menu.Changing booting modeThere are two boot modes UEFI and Legacy for your computer. The default boot mode for your computer isthe UEFI mode. If you need to install a legacy Windows operating system (any operating system beforeWindows 8) on your computer, you must change the boot mode to Legacy support. The legacy Windowsoperating system cannot be installed if you don’t change the boot mode.To change the booting mode, do the following:1. Start the Lenovo BIOS Setup Utility program (see “Starting the Lenovo BIOS Setup Utility program” onpage 13).2. From the Lenovo BIOS Setup Utility program main menu, select the Startup option.3. Select the Boot Priority, then press Enter key. From the pop up “Boot Priority” window chooseLegacy mode.4. Return to the Lenovo BIOS Setup Utility program menu and select the Exit option.5. Select Save Changes and Exit from the menu.Exiting the Lenovo BIOS Setup Utility programAfter you finish viewing or changing settings, press the Esc key to return to the Lenovo BIOS Setup Utilityprogram main menu. You might have to press the Esc key several times. Do one of the following:• If you want to save the new settings, select Save Changes and Exit from the menu. When the Save& reset window shows, select the Yes button, and then press the Enter key to exit the Lenovo BIOSSetup Utility program.• If you do not want to save the settings, select Discard Changes and Exit from the menu. When theReset Without Saving window shows, select the Yes button, and then press the Enter key to exit theLenovo BIOS Setup Utility program.Chapter 5. Using the Setup Utility 17
/ 57
Related manuals for Lenovo YOGA HOME 500
Lenovo ThinkCentre 7522 User Manual first page preview
Lenovo ThinkCentre 7522 User Manual
This manual is suitable for:
YOGA HOME 500
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved