Lenovo ThinkSystem SR630 Maintenance Manual

Also see for thinksystem SR630: Manual Manual Quick start guide Maintenance manual Product guide

• YouTube: https://www.youtube.com/playlist?list=PLYV5R7hVcs-Cmxb8e4L4PvMQ7J5PxvuOK• Youku: https://list.youku.com/albumlist/show/id_59643656ProcedureFigure 95. OCP 3.0 Ethernet adapter removalStep 1. Loosen the thumbscrew that secures the adapter.Step 2. Pull out the OCP 3.0 Ethernet adapter by its handle on the left as shown.After you finishInstall a new OCP 3.0 Ethernet adapter or a card filler. See “Install the OCP 3.0 Ethernet adapter” on page172.Install the OCP 3.0 Ethernet adapterUse this information to install the OCP 3.0 Ethernet adapter.About this taskAttention:• Read “Installation guidelines” on page 83 to ensure that you work safely.• Power off the server and disconnect all power cords for this task.• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-sensitive components in their static-protective packages until installation, and handling these devices withan electrostatic-discharge wrist strap or other grounding system.A video for this task is available at:• YouTube: https://www.youtube.com/playlist?list=PLYV5R7hVcs-Cmxb8e4L4PvMQ7J5PxvuOK• Youku: https://list.youku.com/albumlist/show/id_59643656ProcedureStep 1. Touch the static-protective package that contains the OCP 3.0 Ethernet adapter to any unpaintedsurface on the outside of the server. Then, take the OCP 3.0 Ethernet adapter out of the packageand place it on a static-protective surface.172 ThinkSystem SR630 V2 Maintenance Manual