Lenovo ThinkSystem SR550 Maintenance Manual

Also see for ThinkSystem SR550: Manual Manual Product guide Quick start guide Setup guide

Update the machine type and serial numberAfter the system board is replaced by trained service technicians, the machine type and serial number mustbe updated.There are two methods available to update the machine type and serial number:• From Lenovo XClarity Provisioning Manager V3To update the machine type and serial number from Lenovo XClarity Provisioning Manager V3:1. Start the server and press F1 to display the Lenovo XClarity Provisioning Manager V3 interface.2. If the power-on Administrator password is required, enter the password.3. From the System Summary page, click Update VPD.4. Update the machine type and serial number.• From Lenovo XClarity Essentials OneCLILenovo XClarity Essentials OneCLI sets the machine type and serial number in the Lenovo XClarityController. Select one of the following methods to access the Lenovo XClarity Controller and set themachine type and serial number:– Operate from the target system, such as LAN or keyboard console style (KCS) access– Remote access to the target system (TCP/IP based)To update the machine type and serial number from Lenovo XClarity Essentials OneCLI:1. Download and install Lenovo XClarity Essentials OneCLI.To download Lenovo XClarity Essentials OneCLI, go to the following site:https://datacentersupport.lenovo.com/solutions/HT1164332. Copy and unpack the OneCLI package, which also includes other required files, to the server. Makesure that you unpack the OneCLI and the required files to the same directory.3. After you have Lenovo XClarity Essentials OneCLI in place, type the following commands to set themachine type and serial number:onecli config set SYSTEM_PROD_DATA.SysInfoProdName [access_method]onecli config set SYSTEM_PROD_DATA.SysInfoSerialNum ~~[access_method]~~Where:The server machine type and model number. Type mtm xxxxyyy, where xxxx is the machine typeand yyy is the server model number.The serial number on the server. Type sn zzzzzzz, where zzzzzzz is the serial number.[access_method]The access method that you select to use from the following methods:– Online authenticated LAN access, type the command:[--bmc-username xcc_user_id --bmc-password xcc_password]Where:xcc_user_idThe BMC/IMM/XCC account name (1 of 12 accounts). The default value is USERID.xcc_passwordChapter 3. Hardware replacement procedures 159