Lenovo ThinkServer TD230 Hardware Maintenance Manual

Contents

Table 3. Hot-swap hard disk drive status LEDsHot-swap hard disk drive status LED State DescriptionOn The hot-swap hard disk drive is present.1 Hot-swap hard disk drive present LEDOff The hot-swap hard disk drive is not present.On The hot-swap hard disk drive is active.2 Hot-swap hard disk drive activity LEDOff The hot-swap hard disk drive is not active.LEDs for the Ethernet connectorsThe Ethernet 1 and Ethernet 2 connectors have two status LEDs that indicate the LAN connection andactivity of the connection.Table 4. Ethernet LEDsLED State Color DescriptionOn Green 10/100/1000 Mb linkedBlinking Green 10/100/1000 Mb activityRJ-45 Linkage and Activity (left)Off Off No LAN connection.On Amber 1000 Mb linked and activeOn Green 100 Mb linked and activeRJ-45 Linkage and Activity (right)Off Off 10 Mb mode or no LAN connection.Locating server componentsFigure 6 “Server component locations (side view without the server cover)” on page 33 shows the locationsof the major components in your server. To remove the server cover and gain access to the inside of theserver, see “Removing the server cover” on page 43.32 ThinkServer TD230 Hardware Maintenance Manual