To make a CD image, complete the following steps:1. Start the Creator Business Edition application.2. Click the Copy page.3. Click the task Save Image to Hard disk.4. The application creates a random name for you. Rename the image file.5. Insert the disc that you are imaging.6. Click the Record button.Notes:1. DLA CDs cannot be saved as image files.2. Copy-protected commercial CDs cannot be imaged.To burn a previously saved image, complete the following steps:1. Start the Creator Business Edition application.2. Click the Copy page.3. Click the task Burn Image to CD or DVD.4. Use the Browse button to navigate to the image that you want to burn.5. Insert a blank or erasable disc.6. Click the Record button.To copy a disc, complete the following steps:1. Start the Creator Business Edition application.2. Click the Copy page.3. Click the task Copy a disc.4. Insert the disc that you want to copy.5. Click the Record button.6. When prompted, insert the target disc.Notes:1. Copy-protected CDs cannot be copied.2. Copying or imaging discs without the copyright owner’s permission can result in legal penalties. Formore information on copyright law, consult your legal advisor.Problem solvingComputer problems can be caused by hardware, software, or user error. The information in this sectionmight be useful to help you solve problems or to gather helpful information you can pass on to a servicetechnician. You might also need to refer to your computer, operating-system, or sound-adapterpublications.Review the following list for any problem descriptions that might fit your situation.You cannot create a multi-session disc.Be sure that there is enough space left on the disc for another session. Writing a session requires lead-inand lead-out space (about 15 MB) in addition to the data that is recorded.You cannot successfully write to a CD-R or CD-RW disc.Complete these steps:Chapter 2. Using the ThinkPad CD-RW/DVD-ROM Ultrabay Serial ATA Drive 9