Lenovo ThinkCentre TIO24Gen3Touch User Manual

Chapter 1. 1-11Turning on your monitor and computerTo turn on your monitor and computer, do one of the following:• If you only have the Tiny installed in the monitor, press the power button on the monitorto turn on your monitor and computer. To locate the power button, see"Locatingconnectors and controls on your monitor"on page 1-3.• If you only have the external desktop/laptop computer connected to the monitor, press thepower button on the monitor to turn on your monitor. Then, press the power button on thecomputer to turn on your computer. To locate the power button, see"Locating connectorsand controls on your monitor"on page 1-3.• If you have both the Tiny installed in the monitor and the external desktop/laptopcomputer connected to the monitor, do one of the following:• If you use the Tiny, press the power button on the monitor to turn on your monitor andcomputer. To locate the power button, see "Locating connectors and controls on yourmonitor"on page 1-3.• If you use the external desktop/laptop computer, press the mode-switching button onthe monitor to select the DP mode so that the monitor is turned on. Then, press thepower button on the computer to turn on your computer. To locate the mode-switchingbutton, see "Locating connectors and controls on your monitor"on page 1-3.Note: When both the Tiny and the external desktop/laptop computer are working, you canpress the mode-switching button to switch between the two computers. When you select theAIO mode, you will use the Tiny. When you select the DP mode, you will use the externaldesktop/laptop computer.When you switch between the AIO mode and the DP mode, ensure that no data is beingtransmitted between your computer and any USB device that is connected to your monitor. Ifyou switch between the two modes while the USB data is being transmitted, the transmissionwill be interrupted and loss of data may result.When you switch between the AIO mode and the DP mode the following is required to wakeyour computer from sleep or hibernation:• DP mode to AIO mode. If the Tiny installed in your monitor is in sleep or hibernationmode, press the power button of the monitor to wake up the Tiny.• AIO mode to the DP mode. If the external desktop/laptop computer is in sleep orhibernation mode, press the power button of the external desktop/laptop computer towake up it.Note: When you switch between AIO mode and DP mode, the keyboard and mouse that areconnected to your monitor are also switched.