Removing and reinstalling the front bezelAttention:Do not open your computer or attempt any repair before reading and understanding the “Important safety information”in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentreSafety and Warranty Guide, go to:http://www.lenovo.com/supportThis section provides instructions on how to remove and reinstall the front bezel.To remove and reinstall the front bezel, do the following:1. Turn off the computer and disconnect all power cords from electrical outlets.2. Remove the computer cover. See “Removing the computer cover” on page 32.3. Remove the front bezel by releasing the three plastic tabs on the left side and pivoting the front bezeloutward.Figure10. Removing the front bezel4. To reinstall the front bezel, align the three plastic tabs on the right side of the front bezel with thecorresponding holes in the chassis, then pivot the front bezel inwards until it snaps into position onthe left side.What to do next:• To work with another piece of hardware, go to the appropriate section.• To complete the installation or replacement, go to “Completing the parts replacement” on page 66.Chapter 5. Installing or replacing hardware 33
