Setting the DisplayFollow this procedure to set the display.To set the display1. Open Screen Resolution.2. Set the display options. Refer to the table below for details on each option.Table 4-1. WDP OptionsMenu Sub-Menu DescriptionDisplay Use the drop down list to select adisplay to be configured.Resolution Use the drop down list and userthe slider to choose a resolution.Landscape Sets the display to landscapeview.Portrait Sets the display to portrait mode.Landscape (flipped) Sets the display to upside downlandscape mode.OrientationPortrait (flipped) Sets the display to upside downportrait mode.Duplicates these displays Reproduces the main display onthe second display.Extend these displays Extends the main display ontothe secondary display.Show Desktop only on 1 The desktop appears on thedisplay marked 1. The displaymarked 2 becomes blank.Multiple displaysShows Desktop only on 2 The desktop appears on thedisplay marked 2. The displaymarked 1 becomes blank.To control the behaviour of an attached USB Monitor display, it is also possible to use Windows Key+P todisplay a menu (and cycle through it) to switch mode.To control the Display1. Select the Windows Key+P.4-4 LT1423pwC Wide Touch Monitor User’s Guide