Menu
Lenovo IdeaPad 2 in 1-14 Hardware Maintenance Manual
                                                                                        |
3Safety informationElectrical safetyObserve the following rules when working on electrical equipments.Important:Use only approved tools and test equipments. Some hand tools have handlescovered with a soft material that does not insulate you when working with liveelectrical currents.Many customers have rubber floor mats near their machines that contain smallconductive fibers to decrease electrostatic discharges. Do not use such kind of matto protect yourself from electrical shock.• Find the room emergency power-off (EPO) switch, disconnecting switch orelectrical outlet. If an electrical accident occurs, you can then operate theswitch or unplug the power cord quickly.• Do not work alone under hazardous conditions or near the equipment thathas hazardous voltages.• Disconnect all power before:– Performing a mechanical inspection– Working near power supplies– Removing or installing main units• Before you start to work on the machine, unplug the power cord. If youcannot unplug it, ask the customer to power-off the wall box that suppliespower to the machine, and to lock the wall box in the off position.• If you need to work on a machine that has exposed electrical circuits,observe the following precautions:– Ensure that another person, familiar with the power-off controls, is nearyou.Attention: Another person must be there to switch off the power, ifnecessary.– Use only one hand when working with powered-on electrical equipment;keep the other hand in your pocket or behind your back.Attention: An electrical shock can occur only when there is a completecircuit. By observing the above rule, you may prevent a current frompassing through your body.– When using testers, set the controls correctly and use the approvedprobe leads and accessories for that tester.– Stand on suitable rubber mats (obtained locally, if necessary) to insulateyou from grounds such as metal floor strips and machine frames.Observe the special safety precautions when you work with very high voltages;instructions for these precautions are in the safety sections of maintenanceinformation. Be extremely careful when you measure the high voltages.• Regularly inspect and maintain your electrical hand tools for safe operationalcondition.• Do not use worn or broken tools and testers.• Never assume that power has been disconnected from a circuit. First, checkit to make sure that it has been powered off. |
Related manuals for Lenovo IdeaPad 2 in 1-14
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved