54Lenovo ideapad 2in1 14 Hardware Maintenance Manual1140 Camera board, sensor board and EDP cableFor access, remove these FRUs in order:• “1010 Base cover” on page 31• “1020 Battery pack” on page 33• “1030 Solid state disk” on page 34• “1040 Hard disk drive” on page 35• “1050 PCI Express Mini Card for wireless LAN” on page 36• “1060 Speakers” on page 38• “1080 Fan and Heat Sink assembly” on page 41• “1090 IO board” on page 44• “1100 System board” on page 46• “1110 Upper case” on page 48• “1130 LCD unit” on page 51Figure 14. Removal steps of camera board, sensor board and EDP cablePeel off the tape that secures the camera board 1. Unplug the connector inthe direction shown by arrow 2.12When installing: Make sure that the connector is attached firmly.

Lenovo IdeaPad 2 in 1-14 Hardware Maintenance Manual

Product

Learn More

Legal