Menu
Lenovo IDEACENTRE 300s series Maintenance Manual
                                                           |
Step 7. Remove the memory module being replaced by opening the retaining clips as shown.Step 8. Insert the notched end 1 of the new memory module into the slot. Press the memory modulefirmly and pivot the memory module until it snaps into place. Make sure that the memory module issecured in the slot and does not move easily.Step 9. For ideacentre 300S-11ISH, refer to the below instructions:Step 10. Remove the memory module being replaced by opening the retaining clips as shown.32 ideacentre 300S Series Hardware Maintenance Manual |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved