Menu
Lenovo C360 Hardware Maintenance Manual
                                                             |
Step 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)cables, and any other cables that are connected to the computer. Refer to “Left and right view”and “Rear view” for help with locating the various connectors.Step 4. Remove the stand base. Refer to “Removing the stand base”.Step 5. Remove the foot cover. Refer to “Removing the foot cover”.Step 6. Remove the memory modules. Refer to “Replacing a memory module”.Step 7. Remove the optical drive. Refer to “Replacing the optical drive”.Step 8. Remove the stand holder. Refer to “Removing the stand holder”.Step 9. Remove the middle cover. Refer to “Removing the middle cover”.Step 10. Remove the EMI cover. Refer to “Removing the EMI cover”.Step 11. Remove the speaker system. Refer to “Replacing the speaker system”.Step 12. Remove the heat-sink. Refer to “Replacing the heat-sink”.Step 13. Remove the camera. Refer to “Replacing the camera”.Step 14. Disconnect the front function cables from connectors as shown:Step 15. Disconnect the front indicator board cable from connector as shown:Chapter 7. Replacing hardware 49 |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved