Menu
Lenovo C360 Hardware Maintenance Manual
                                                             |
To Connect To Disconnect1. Turn everything OFF.2. First, attach all cables to devices.3. Attach signal cables to connectors.4. Attach power cords to outlet.5. Turn device ON.1. Turn everything OFF.2. First, remove power cords from outlets.3. Remove signal cables from connectors.4. Remove all cables from devices.CAUTION:When replacing the lithium battery, use only Part Number 45C1566 or an equivalent type batteryrecommended by the manufacturer. If your system has a module containing a lithium battery, replaceit only with the same module type made by the same manufacturer. The battery contains lithium andcan explode if not properly used, handled, or disposed of.Do not:• Throw into or immerse in water• Heat to more than 100°C (212°F)• Repair or disassembleDispose of the battery as required by local ordinances or regulations.CAUTION:When laser products (such as CD-ROMs, DVD-ROM drives, fiber optic devices, or transmitters) areinstalled, note the following:• Do not remove the covers. Removing the covers of the laser product could result in exposure tohazardous laser radiation. There are no serviceable parts inside the device.• Use of controls or adjustments or performance of procedures other than those specified hereinmight result in hazardous radiation exposure.DANGERSome laser products contain an embedded Class 3A or Class 3B laser diode. Note the following:These diodes emit radiation when open. Do not stare into the beam, do not view directly withoptical instruments, and avoid direct exposure to the beam.Chapter 2. Safety information 7 |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved