Lenovo 10KY Hardware Maintenance Manual

3. Depending on the password type, select Set Power-On Password, Set Administrator Password, orHard Disk Password and press Enter.4. Follow the instructions on the right side of the screen to set, change, or delete a password.Note: A password can be any combination of up to 64 alphabetic and numeric characters. For moreinformation, see “Password considerations” on page 59.5. Exit the Setup Utility program. See “Exiting the Setup Utility program” on page 60.Selecting a startup deviceIf the computer does not start up from a device as expected, you can choose to change the startup devicesequence permanently or select a temporary startup device.Changing the startup device sequence permanentlyTo change the startup device sequence permanently, do the following:1. Depending on the type of the storage device, do one of the following:• If the storage device is internal, go to step 2.• If the storage device is a disc, ensure that the computer is on or turn on the computer. Then, insertthe disc into the optical drive.• If the storage device is an external device other than a disc, connect the storage device to thecomputer.2. Start the Setup Utility program. See “Starting the Setup Utility program” on page 57.3. Select Startup.4. Follow the instructions on the right side of the screen to change the startup device sequence.5. Exit the Setup Utility program. See “Exiting the Setup Utility program” on page 60.Selecting a temporary startup deviceNote: Not all discs and storage drives are bootable.To select a temporary startup device, do the following:1. Depending on the type of the storage device, do one of the following:• If the storage device is internal, go to step 2.• If the storage device is a disc, ensure that the computer is on or turn on the computer. Then, insertthe disc into the optical drive.• If the storage device is an external device other than a disc, connect the storage device to thecomputer.2. Turn on or restart the computer. Before Windows starts up, repeatedly press and release the F12 keyuntil Startup Device Menu is displayed.Note: For some keyboards, you might need to press Fn+F12 to display Startup Device Menu.3. Select the desired storage device and press Enter. The computer will start up from the device you select.If you want to select a permanent startup device, select Enter Setup on Startup Device Menu and pressEnter to start the Setup Utility program. For more information about how to select a permanent startupdevice, see “Changing the startup device sequence permanently” on page 60.Exiting the Setup Utility programTo exit the Setup Utility program, do one of the following:60 Lenovo S510 Hardware Maintenance Manual