Larson Electronics GVP-48-2L-LED-D-V2 Instruction Manual

Larson Electronics GVP-48-2L-LED-D-V2 Instruction Manual Manual pdf 1 page image

GVP-48-2L-LED-D-V2Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com 1 of 30-10V Dimmable 56 Watt Vapor Proof LED 4 Foot Light for Outdoor Applications7000 Lumens - IP67Instruction ManualThank you for your purchase of the Larson Electronics GVP-48-2L-LED-D-V2.WARNING:READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.CRITICAL SAFETY INSTRUCTIONS:• INSTALLATION SHOULD ONLY BE CONDUCTED BY A QUALIFIED ELECTRICIAN IN ACCORDANCE WITH NEC AND ANYRELEVANT LOCAL BUILDING CODES.• RISK OF FIRE OR ELECTRIC SHOCK. FIXTURE INSTALLATION REQUIRES KNOWLEDGE OF FIXTURE'S ELECTRICALSYSTEMS. IF NOT QUALIFIED, CONTACT A QUALIFIED ELECTRICIAN.• BE CERTAIN ELECTRICAL POWER IS OFF BEFORE AND DURING INSTALLATION AND MAINTENANCE.• MAKE SURE THE SUPPLY VOLTAGE IS THE SAME AS THE FIXTURE'S RATED VOLTAGE.• TO PREVENT WIRING DAMAGE OR ABRASION, DO NOT EXPOSE WIRING TO EDGES OF SHEET METAL OR SHARPOBJECTS. SUITABLE FOR DAMP LOCATIONS.IMPORTANTREAD CAREFULLY BEFORE INSTALLING THIS FIXTURE. SAVE THESE INSTRUCTIONS FOR FUTUREREFERENCE. THE GVP-48-2L-LED-D-V2 MUST BE WIRED IN ACCORDANCE WITH NATIONAL ELECTRICALCODE AND ALL APPLICABLE LOCAL CODES. PROPER GROUNDING IS REQUIRED FOR SAFETY.WE STRONGLY ENCOURAGE ONLY A LICENSED ELECTRICIAN INSTALL, OPERATE AND MAINTAIN THISPRODUCT. IF YOU ARE NOT QUALIFIED OR UNFAMILIAR WITH ANY ASPECT OF THIS INSTRUCTION SHEET,CONSULT AN ELECTRICIAN. THERE ARE NO SERVICEABLE PARTS INSIDE.WARNING: MAKE SURE POWER IS TURNED OFF BEFORE STARTING THEINSTALLATION OR PERFORMING ANY MAINTENANCE.RISK OF FIRE/ELECTRIC SHOCK – DISCONNECT POWER AT BREAKER BEFORE INSTALLING OR SERVICING.RISK OF PERSONAL INJURY – FIXTURE MAY BECOME UNSTABLE OR DAMAGED IF NOT INSTALLED PROPERLY.RISK OF BURN – ALLOW FIXTURE TO COOL BEFORE SERVICING.The Larson Electronics GVP-48-2L-LED 0-10V Dimmable LED Light Fixture is similar to our popular explosion proof LED fixtures andprovides an LED alternative to fluorescent fixtures that provides longer lamp life and higher performance. These two dimmable LEDlamp fixtures produce more output with longer lamp life and are vapor proof and impact/ vibration resistant. This vapor proof LED lightis ideal for applications such as ships, offshore applications, marine (saltwater) use, manufacturing, water treatment centers, shoppingmalls, parking structures, and outdoor flood lighting.WIRINGStandard pigtail(flying leads) wiringWe strongly encourage a licensed electrician install this product, in all locations especially in outdoor areaswhere weatherproofing may be required. Universal voltage driver permits operation at 120V - 277V AC, 50 or 60Hzexcept those factory ordered with low voltage 11V to 25V AC/DC.Warning: Check product label for correct input voltage!Attach supply line wires to the appropriate light fixture wires as shownin the diagram Secure each pair of wires according to the diagram. Utilize a junction box orsimilar device and take precautionary steps for weatherproofing allconnections if installed in a location where water may come in contact with theunit. Ensure the unit is properly grounded and that wiring is done according toall local and national electrical/building codes.

/ 3

Related manuals for Larson Electronics GVP-48-2L-LED-D-V2