Laguna Tools Fusion F1 Owner's Manual

Also see for Fusion F1: Owner's manual

Laguna Tools Fusion F1 Owner's Manual Manual pdf 22 page image

F1 Table Saw22Setup Help SectionsReceivingIt is likely that your machine will be delivered by a third party. Before unboxing, be sure to inspect thepackaging and shipping documents supplied by the driver. Ensure that there is no visible damage to theshipment. If any damage has occurred because of shipment, note the damage on the bill of lading or refusethe shipment. Immediately call the dealer store where the machine was purchased.1. Never accept a shipment that is damaged or partial without notifying the shipping company and thepurchasing store.PlacementPrior to removing the machine from the packaging, decide the operating location of the machine. Thedimensions and floor space can be found here: Dimensions.1. There should be sufficient area at the front of the machine to allow you to work on it comfortably.2. There should be sufficient area at the back of the machine to allow access for adjustments andmaintenance to be conducted.3. The better the lighting the more accurately and safely you will be able to work.4. You should select a solid flat floor, preferably one made of concrete or something similar.5. Locate it close to a power source and dust collection (if applicable).UnboxingOnce in place, carefully unbox and remove all components. Unboxing guidelines:1. Do not cut deep into a box with a blade as it could scratch the paint; only cut deep enough to cut the tapeor use a dull edge.2. Prior to setting up the machine, organize all hardware and setup tools needed.