Labgear LAB350W User Manual

Contents

installation instructions

Labgear LAB350W User Manual Manual pdf 1 page image

High Gain Compact Digital Professional Aerial• Tilting mast clamp for easy adjustment• Easy dipole assembly• Unique compact folding design• 12dB gain• Length: 790mm• Electronic 75Ω balun with F type connectionInstallation InstructionsCongratulations on the purchase of your compact high gain digital aerial.The aerial is ideal for the reception of all available signals in medium and strong signal areas.The aerial is of particularly robust construction to ensure a long operating life and features:For optimum results install the aerial using double screened CAIapproved digital coax cable (not supplied) and screened coaxoutlets (not supplied). You will need to fit the coax cable with anF type connector to connect to the aerial balun.1. Preparing the coax cable downlead: First slide therubber weather boot provided over the aerial end ofthe cable. Strip the end of the cable as shown inFig. 1. Once you have stripped the cable, fold thebraid back over the outer sheath making sure that nobraid is touching the copper core, as this will cause ashort on the cable and you will not get any signal.Also cut or tear away any foil shielding.2. Twist the ‘F’ connector supplied on to the preparedaerial end of the cable and trim the central conductorsee Fig. 2. Once you have installed your aerial andrun and secured the cable prepare the other end forconnection to an outlet or coax plug (not supplied).For best results the aerial should be mounted on anoutdoor aerial mast and pointed in the direction ofthe nearest transmitter* making sure it is in a positionwhere the transmitter signal will not be obstructedby nearby trees and buildings. If you are in any doubtabout the direction in which the aerial should bepointing or the orientation of the aerial (horizontal formain transmitter, vertical for relay transmitter) checkyour neighbours’ aerials.1. Unfold the booms as shown opposte. To lock thebooms in position turn both of the two knobs oneither side of the aerial in a clockwise directionthrough 180˚ making sure that the arrows lineup with the locked symbol - see Fig. 4.fold braid backover sheath8mminnerwirecut or tearaway foil6.5mmFig. 1screw connectorbody onto cable2mm approx.end ofinsulationshould beflush withthis faceFig. 2Locking knobFig. 3aFig. 4 LockedSymbolLAB350W USER GUIDEFig. 3bFig. 3c

/ 2

Related manuals for Labgear LAB350W