KitchenAid KSB1585 Manual

Contents

KitchenAid KSB1585 Manual Manual pdf 15 page image

CMD + SHIFT CLICK TO CHANGE COPYEnglish15TROUBLESHOOTINGBlender does not operate when a setting is selectedAll indicator lights are flashing alternately�The Blender may be jammed� If it isjammed, the Blender will stop running toavoid damage to the motor� Press POWER( ) to reset the Blender and unplug thepower cord� Remove the pitcher assemblyfrom the base and, with a scraper, freethe blades by breaking up or removing thecontents at the bottom of the pitcher�No indicator lights are lit�Check to see if the Blender is pluggedinto a grounded outlet� If it is, pressPOWER ( ); then unplug the Blender�Plug it back in to the same outlet, andPress POWER ( )� If the Blender stilldoes not work, check the fuse or circuitbreaker on the electrical circuit theBlender is connected to and make sure thecircuit is closed�All indicator lights are flashingat the same time�The Blender may be overloaded� If theBlender becomes overloaded when blendingheavy ingredients, it will automatically shutoff to avoid damage to the motor� PressPOWER ( ) to reset the Blender and unplugthe power cord� Remove the pitcher assemblyfrom the base and divide contents intosmaller batches� Adding liquid to the pitchermay also reduce the load on the Blender�Blender stops while blendingOne indicator light is flashing alternately�If the Blender is plugged in, but will not startand one light is flashing alternately from allthe other indicator lights, the Blender mayhave a stuck key� Press POWER ( ) to turnoff the Blender; then unplug the Blender� Plugthe Blender back in and press POWER ( )to turn back on to reset the stuck key�All indicator lights are flashing at thesame time�If the Blender is plugged in, but nothinghappens when POWER ( ) is pressed, andall indicator lights are flashing, the motorrotor may be locked� Press POWER ( );then unplug the Blender� Plug it back in;then press POWER ( ) and select thedesired speed�IMPORTANT: The Blender will not operate at any speed unless the POWER ( ) buttonis pressed first�© 2016� All rights reserved�Specifications subject to change without notice.