KitchenAid 5KSB555AAC Service Manual

Contents

KitchenAid 5KSB555AAC Service Manual Manual pdf 5 page image

BLENDER SERVICE MANUAL5Blender Assembly1. Put locking collar with blades pointing up on a sturdysurface (Fig. 2).Figure 22. Put sealing ring (1), flat side down, around theblades and into the groove within the lockingcollar (2) (Fig. 3).12Figure 33. Align the pitcher tabs with the slots of the lockingcollar (Fig. 4).Figure 44. Press down and rotate pitcher clockwise,approximately ¼ turn until two clicks areheard (Fig. 5).Figure 55. Adjust the length of the blender power cord (Fig.6).Figure 66. Put pitcher assembly onto the blender base (Fig. 7).Figure 7NOTE: When properly positioned, pitcher assembly willrest completely on blender base. If not, repeat steps 3and 4.7. Put lid on pitcher.WARNINGElectrical Shock HazardPlug into grounded outlet.Do not use an adapter.Do not use an extension cord.Failure to follow these instructions can result indeath, fire or electrical shock.8. Plug power cord into a grounded outlet. Blender isnow ready for operation.9. Before removing the pitcher assembly from thebase, always press “O” and unplug the power cord.