10oPoPEraTINg THE HaND BlENDErBefore First UseBefore using the Hand Blender for thefirst time, wipe the motor body, theblending arm with blade and the guardswith a clean, damp cloth to remove anydirt or dust. Mild dish soap may be used.Do not use abrasive cleansers. Drythoroughly with a soft cloth. See “Careand Cleaning” section for more information.assembling the Hand Blender4 Snap pan guard into place with an even,downward motion.3 If using a pan guard, place it on a flatsurface and position with mounting clipsbetween the ports of the blade.1 Insert blending arm into motor bodyand twist until it clicks to lock in place.PortMountinggripsNoTE: Use the bellguard to avoid damage toblade when Hand Blenderis not in use.Use the pan guard toavoid damage to cookwarewhile using Hand Blender.Bell guardPan guard2 Remove the bell guard from the blade.5 Slide the charged battery into the topof the Hand Blender motor body. Makesure it latches securely.