Kinnarps Works GE Information

Contents

Kinnarps Works GE Information Manual pdf 4 page image

4CAUTION! PLEASE KEEP THIS INFORMATION FOR THE USER IN A PLACE WHERE IT ISACCESSIBLE TO ALL USERS AT ALL TIMES!Ensure the safety instructions are complied with.Improper operation may result in danger to persons and to objects and will invalidate theguarantee.The table is intended exclusively for its application as office furniture. Any other or further•application is not in accordance with the conditions.The table may only be used when in technical perfect condition and subject to the•information for the user.The table must be erected on level flooring when put into operation for the first time.•The height-adjusting screws on the foot extensions may be raised or lowered by +/- 1 cmto correct unevenness.When erecting the table, sufficient room for the entire scope of the lift must be ensured.•Ensure the length of cables from all devices on the table is adequate.•When transporting or moving the table, only the underframe may be held. The table may•not be raised by the tabletop, as the fixing screws may be torn out.The power plug to the table must be accessible at all times.•All cables and wires are to be protected from excessive heat.•The table is not to be used in a wet or moist environment.•The housing of the control unit must not be opened.•Plug connections may be made or de-coupled only when the power supply is off.•CAUTION! DANGER OF CRUSHING! Sufficient room between the sides of the table and•any near object, walls etc. must be ensured for the entire range of lift (2.5 cm minimum).Further, the user must ensure that no person and no object (e.g. open doors and windowsor chair armrests) may lie within or protrude into the range of lift. Danger of crushing isparticularly prevalent in the upper section of the column when lowering the table.The maximum permissible load on the table (see technical information) must not be excee-•ded!Electrical wirings and connections are to be carried out exclusively by authorised specialists.•All electrical installations must be in compliance with DIN VDE 0100, in particular with DINVDE 0100 Part 724.Safety notice

/ 12

Related manuals for Kinnarps Works GE

Kinnarps WORKS DS Assembly Instructions Manual

Kinnarps P Series Instructions Manual

Kinnarps Nano Assembly Instructions Manual

Kinnarps MULTICOM plus Assembly Instructions Manual

This manual is suitable for:

Works GE

Kinnarps Works GE Information

Product

Learn More

Legal