King-Dome 9630 Installation And Operating Instructions Manual

Also see for 9630: Troubleshooting guide

Contents

King-Dome 9630 Installation And Operating Instructions Manual Manual pdf 18 page image

Store Satellite Position #11. Once locked onto a desired satellite, hold LEFT AND RIGHTarrows simultaneously until display flashes.2. Hold LEFT arrow until 1P (Position 1) appears on display.Position #1 is stored in memory for this position.Store Satellite Position #23. Once locked onto the second desired satellite, holdLEFT AND RIGHT arrows simultaneously untildisplay flashes.4. Hold RIGHT arrow until 2P (Position 2) appears on display.Position #2 is stored in memory for this position.Recall Satellite Position #15. Press DOWN AND LEFT arrows simultaneously.Dish will automatically move to Satellite Position #1 andcontroller will display 1P.Recall Satellite Position #26. Press DOWN AND RIGHT arrows simultaneously.Dish will automatically move to Satellite Position #2 andcontroller will display 2P.SECTION 5 STORE/RECALL POSITIONSNote: For use with multi-satellite services. (such as Dish 500)Page 16