Kimo DS300 User Manual

Contents

Kimo DS300 User Manual Manual pdf 35 page image

10.15 Files transferThis function allows to transfer data to a computer with a USB cable. LDS23 or LDS300 software will have been previouslyinstalled on the computer.➢ Turn on DS300.➢ Link DS300 to PC with a USB cable.➢ Press 5 key from start screen.➢ Move the cursor on PC item with 1 and 2 keys.➢ Validate with 3 key.Screen PC is displayed.➢ Press 3 key to pour activate USB connection.In case of direct connection of the turned off DS300 to the PC, USB connection is activated automatically. PC screen isdisplayed instantaneously, then the drawn cross on the DS300 screen disappears after a few seconds to confirm the USBconnection.After the transfer, turn off the instrument directly or leave PC screen pressing 4 key.The instrument is considered by the operating system as a removable disk. Files transfer can be perform according to twoways:• through LDS23 or LDS300 software (see software user manual)• directly by activating the files manager of the operating system of the PC (for example: copy/paste function, sendto,...) to move files of the removable disk (DS300) to the repertory the directory for the classification of themeasurements.10.16 Delete filesAfter the storage of the measurement datasets thanks to the transfer to a computer, it is possible to delete the memory ofthe instrument. Two ways exist:• through the instrument• through LDS23 or LDS300 softwareThrough the DS300 instrument:➢ Go to PC screen of the DS300.➢ Press 1 key (RAZ).RAZ blinks.➢ Press again 1 key (RAZ) to confirm the deletion of all the data.Progress bar is displayed.➢ Leave the screen with 4 key.The totality of datasets inside the DS300 instrument will be deleted.35PCRazContr./RétroProg. mesureLecturePCConfigurationAutonomieInstrumentA propos...OKPCRazPC