Kimball Office Footprint 6"W Wardrobe Assembly Instructions Manual

Kimball Office Footprint 6"W Wardrobe Assembly Instructions Manual Manual pdf 1 page image

Assembly InstructionsFootprint ® Page 1 of 2Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.If you have any questions concerning these instructions, please call Kimball Office Customer Service.Part No. 2066788 Revision B-086"W WardrobeTools Required Level “C” clamp 3⁄16" nutdriver or socket Phillips screwdriver Electric drill Six #8 x 11⁄4" Phillips head 1⁄8" drill bit wood screws or appropriatefastenersPackage Contents 6"W Wardrobe 4 plastic glide hole plugsDescriptionThe 6"W wardrobe is NOT freestanding and must be secured toan adjacent casegood item or a wall. An 18"W wardrobe is usedas an example of a casegood item in these instructions(Figure A).Note: Hardware necessary to secure wardrobe is not provided inthe package contents.Installation1. Position 6"W wardrobe on desired side of adjacentcasegood or wall (Figure A).2. Secure 6"W wardrobe to adjacent item using C-clamp(s).Make sure side panels are flush and that there are no gapsbetween the units (Figure B).3. Level the 6"W wardrobe by using the 3⁄16" nutdriver orsocket to adjust the floor glides. When level, ensure allglides are snug against the floor, then insert plastic glidehole plugs (Figure B).Figure AFigure BNo GapsBoth Units Flush

/ 2

Related manuals for Kimball Office Footprint 6"W Wardrobe