Menu
Kidde RemoteLync User Manual
Also see for RemoteLync: User guideUser manual
              | |
1011Maintenance InformationTo keep your RemoteLync Monitor in good working order, pleasefollow these simple steps:• Verify the operation of the monitor’s voices and LED lightsby conducting a test once a week.• Once a month, clean the monitor by using a soft brush at-tachment, vacuum the front vents to remove dust and dirt.After cleaning conduct a test to verify operation.• Never use detergents or other solvents to clean the unit.• Avoid spraying air fresheners, hair spray, or other aerosolsnear the monitor.Do not paint the monitor. Paint will seal the vents and interferewith the sensor’s ability to detect alarm signals. Never attemptto disassemble the unit or clean inside. This action will voidyour warranty.CAUTION: YOUR ACOUSTIC MONITOR IS SEALED AND THECOVER IS NOT REMOVABLE!!Weekly testing is recommended. If at any time the monitor does notperform as described, please verify that it is correctly inserted into thewall outlet, and is connected to your home network. If the monitor stilldoes not appear to be operating properly, call Product Support as shownat the end of the user guide.Reset FunctionThe reset function can be used to return the monitor to its factorysettings and re-start the setup and enrollment processes. Using a smallpin or paper clip, press and hold the reset button on the side of themonitor for 5 seconds (until LEDs start flashing). Then unplug and re-insert the monitor into the power outlet to re-start the setup process.Reset Button Access |
Related manuals for Kidde RemoteLync
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved