Kidde Excellence Series Installation Sheet

Also see for Excellence Series: Installation sheet Installation sheet Installation sheet Installation sheet

Kidde Excellence Series Installation Sheet Manual pdf 1 page image

© 2023 Carrier. All rights reserved. 1 / 31 P/N 12-0201-501-4000-01 • ISS 21NOV23Excellence Series Intelligent Addressable SingleInput Module Installation SheetEN DE ES FR IT NL PL PT SV1 2EN: Installation SheetFiguresFigure 1: Device overview(1) Mounting holes (×4)(2) Loop terminal block(3) Test (T) button(4) Input terminal block(5) Input status LED(6) DIP switch(7) Device status LEDFigure 2: Input connections(1) Normal mode(2) Bi-Level mode(3) Normally Open mode(4) Normally Closed modeDescriptionThis installation sheet includes information on the KE-IU3110Intelligent Addressable Single Input Module (device type 1Ini).The module provides a single remote input to an addressablefire detection system.The module includes an integrated short circuit isolator and issuitable for indoor installation.All 3000 Series modules support the Kidde Excellence protocoland are compatible for use with 2X-A Series fire alarm controlpanels with firmware version 5.0 or later.InstallationWARNING: Electrocution hazard. To avoid personal injury ordeath from electrocution, remove all sources of power andallow stored energy to discharge before installing or removingequipment.Caution: For general guidelines on system planning, design,installation, commissioning, use and maintenance, refer to theEN 54-14 standard and local regulations.Installing the moduleAlways use the NeXT System Builder application to calculatethe maximum number of modules that can be installed.The module must be installed inside a compatible protectivehousing (not supplied) − we recommend the N-IO-MBX-1 DINRail Module Box. Remember to earth the protective housing.Note: An alternative protective housing may be used providingit meets the specifications indicated in “Protective housing” onpage 3.Mount the protective housing onto the wall using a suitablemounting system for the wall characteristics.