Kidde 10LLDCO Manual

Contents

Kidde 10LLDCO Manual Manual pdf 11 page image

106. Installa0on Instruc0ons – Moun0ngTHIS ALARM MUST BE INSTALLED BY A COMPETENT PERSON AND IS TO BE INSTALLEDACCORDING TO THESE INSTRUCTIONSWall-moun0ng (recommended by the manufacturer, ifpossible)1. Using bracket as a guide, drill two holes in a wall 7cm (2 3/8”) apart.2. Insert the two fixings, that are supplied, into the holes.3. Slide bracket on to screws then /ghten.4. Slide alarm onto base plate to ac/vate it, and remember to test it.5. The alarm is tamper-proof and can only be removed using a screw driver.Free-standingALWAYS BE CAREFUL TO LOCATE A FREE-STANDING ALARM WHERE IT IS UNLIKELY TO BEKNOCKED TO THE FLOOR, AND IN ACCORDANCE WITH THE INSTALLATION INSTRUCTIONS -RECOMMENDED LOCATIONS SECTION.Ensure free-standing alarms are placed in the upright posi/on, and not lying flat on a surface.9Wall Moun0ng2539-7201-05_10LLCO_10LLDCO_V1:_ 2016.11.2 9:06 AM Page 10