Keysight E1458A 96-Channel Digital I/O Module User Guide 95[SOURce:] Subsystem Keysight E1458A Command Reference[SOURce:]DIGital:DATAn:LWORd[:VALue]? returns the programmed state of32-bit port n as a decimal number between -231 and (231 - 1).[SOURce:]DIGital:DATAn:LW64[:VALue]? returns the programmed state of the64-bit port as two decimal values, each in the range of -231 to (231 - 1).[SOURce:]DIGital:DATAn:LW96[:VALue]? returns the programmed state the96-bit port as three decimal numbers, each in the range of -231 to (231 - 1).ParametersComments– This command returns the programmed state of the data lines. TheDIG:DATAn[:type]:MON? returns the actual state of the data lines.– :DATAn is the keyword used for commands relating to data output at portn. The port number n must be the last character of the keyword withoutspaces.– Related Commands: [SOURce:]DIGital:DATAn:BITm[SOURce:]DIGital:DATAn:POLarity– *RST Condition: All ports are set for data input.ExampleDIG:DATA3? returns the decimal equivalent of the data lines on 8-bit port 3.Parameter Name Parameter Type Range of Values DefaultDATAn Numeric BYTE none, 0 through 11WORD none, 0, 2, 4, 6, 8, or 10LWORd none, 0, 4, or 8LW64 none or 0LW96 none or 00
