Keysight InfiniiVision 1200 X-Series andEDUX1052A/G OscilloscopesSERVICE GUIDE

Keysight EDUX1052A Service Manual

Glance

In This Guide

Power-On the

Connect Probes to the

Recall the Default Oscilloscope Setup

Compensate Passive Probes

Learn the Front Panel Controls and

Access the Built-In Quick

Learn the Rear Panel

Learn the Oscilloscope

Select the User Interface

To adjust the horizontal (time/div) scale

To adjust the horizontal delay (position)

Panning and Zooming Single or Stopped Acquisitions

XY Time Mode

To display the zoomed time base

setting

To position the time reference (left, center, right)

To turn waveforms on or off (channel or math)

To specify channel coupling

To specify the channel units

To specify the probe skew

FFT Measurement Hints

FFT Units

FFT Aliasing

FFT Spectral Leakage

Math Waveforms To display math waveforms

To perform a math function on an arithmetic operation

Math Operators

Multiply or Divide

Math Transforms

Math Filters

To save a waveform to a reference waveform location

To display a reference waveform

To scale and position reference waveforms

To display reference waveform information

Display Settings To adjust waveform intensity

To set or clear persistence

To clear the display

To adjust the grid intensity

To freeze the display

To turn the label display on or off

To assign a predefined label to a channel

To define a new label

To load a list of labels from a text file you create

To reset the label library to the factory default

Triggers Adjusting the Trigger Level

Forcing a Trigger

Pulse Width Trigger

Pattern Trigger

Rise/Fall Time Trigger

Setup and Hold Trigger

Video Trigger

To trigger on a specific line of video

To trigger on all sync pulses

To trigger on a specific field of the video signal

To trigger on all fields of the video signal

To trigger on odd or even fields

Serial Trigger

To select the Auto or Normal trigger mode

To select the trigger coupling

To enable or disable trigger noise rejection

To set the trigger holdoff

External Trigger Input

Overview of Sampling

Sampling Theory

Oscilloscope Rise Time

Oscilloscope Bandwidth Required

Selecting the Acquisition Mode

Normal Acquisition Mode

Averaging Acquisition Mode

High Resolution Acquisition Mode

Acquiring to Segmented Memory

Navigating Segments

Saving Data from Segmented Memory

To make cursor measurements

Cursor Examples

To make automatic measurements

Measurements Summary

Snapshot All

Voltage Measurements

Minimum

Base

Preshoot

Average

Time Measurements

EDUX1052A

EDUX1052G

InfiniiVision 1200 X Series

Keysight EDUX1052A Service Manual

Product

Learn More

Legal