Keysight 1000B SeriesOscilloscopesServiceGuide

safety notices

Keysight 1000B Series Oscilloscopes—At a Glance

In This Book

Figures

Tables

Service

Cleaning the Oscilloscope

Testing Performance

Before Testing Performance

To test DC gain accuracy

Figure 1. Averages Menu Item

To test analog bandwidth, maximum frequency

Figure 7. Averages Menu Item

To test time scale accuracy

To test trigger sensitivity

Performance Test Record

Returning the Oscilloscope to Keysight for Service

Contacting Keysight

A Safety Notices

Safety Symbols

Index

Keysight 1000B Series Service Manual

1000B Series

Getting Started

Step 1. Inspect the package contents

Step 2. Turn on the oscilloscope

Step 3. Load the default oscilloscope setup

Step 4. Input a waveform

Step 5. Use Auto Scale

Step 6. Compensate probes

Step 7. Become familiar with the Front Panel Controls

Front Panel Overlays for Different Languages

Step 8. Become familiar with the oscilloscope display

Using the Oscilloscope Softkey Menus

Step 9. Use the Run Control keys

Step 10. Access the built-in help

Securing the Oscilloscope

Displaying Data

Using the Horizontal Controls

To adjust the horizontal scale

To adjust the horizontal position

To display the zoomed time base

To change the horizontal time base (Y-T, X-Y, or Roll)

To view the sample rate

Using the Vertical Controls

To turn waveforms on or off (channel, math, or reference)

To specify channel coupling

To specify a bandwidth limit

To specify the probe attenuation

To change the Volts/Div control sensitivity

To invert a waveform

Using Math Function Waveforms

To display the frequency domain using FFT

Using Reference Waveforms

To return the reference waveform to its default scale

Changing the Display Settings

To clear the display

To adjust the grid brightness

Capturing Data

Overview of Sampling

Oscilloscope Bandwidth and Sample Rate

Oscilloscope Rise Time

Oscilloscope Bandwidth Required

Memory Depth and Sample Rate

Choosing the Sampling Mode

To select the equivalent-time sampling mode

Choosing the Acquisition Mode

To select the Normal acquisition mode

To select the Peak Detect acquisition mode

To turn OFF/ON sine(x)/x interpolation

Recording/Playing-back Waveforms

To play-back waveforms

To store recorded waveforms

Adjusting the Trigger Level

Choosing the Trigger Mode

To set up pulse width triggers

To set up video triggers

To set up alternate triggers

Setting Other Trigger Parameters

To set the trigger high-frequency reject coupling

To change the trigger sensitivity

To specify a trigger holdoff

Using the External Trigger Input

Making Measurements

Displaying Automatic Measurements

To display an automatic measurement

Voltage Measurements

Vmin (Minimum Voltage)

Overshoot

Time Measurements

Frequency

Positive Pulse Width

Delay Between Rising Edges

Phase Between Rising Edges

Counter (Frequency)

Making Cursor Measurements

To use manually adjustable cursors

To use tracking cross-hair cursors

To display cursors for automatic measurements

Saving, Recalling, and Printing Data

Saving and Recalling Data

To save and recall oscilloscope setups

To save screens to BMP or PNG format files

To save data to CSV format files

Using the Disk Manager

To switch between files, path, and directory panes

To edit folder/file names

To rename folders

To display disk information

Printing Screens

To choose a PictBridge printer

Keysight 1000B Series Service Manual

Product

Learn More

Legal