Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter 79Setting up Measurement Conditions and DisplaySaving/Recalling Instrument Setup State (Save/Recall Function)Figure 4-4 CATALOG pageMedium modeFunctional descriptionYou have to specify the medium type of the destination or source before savingor recalling instrument configurations.To select the medium mode:Step 1. Press [Save/Recall].Step 2. Use the cursor keys to select the MEDIA field.Step 3. Select the medium mode by pressing the appropriate softkey:Softkey DescriptionINT Uses the internal memory as the destination or source. Once you haveselected this mode, the register numbers (in the No. field) change to 0through 9.EXT Uses USB memory as the destination or source. Once you have selectedthis mode, the register numbers (in the No. field) change to 10 through19.
