QUICK START / MANUAL MODE! Plug into a surge protector outlet. Attach the Red Safety Key on to the treadmill console.! Stand on the treadmill and straddle belt. Attach safety key clip to your clothes.! Press POWER button. There will be an eight (8) second delay after pressing the POWER buttonbefore data can be entered. The WORKOUT TIME window will flash.! Press START/STOP button. Belt will begin to move after 4 seconds. Step on belt slowly after thebelt starts moving. Speed or incline may be adjusted by using the appropriate + (increase) or –(decrease) button.! To end your workout, press START/STOP button. Belt will gradually slow to zero.! To pause your workout, press PAUSE.! To re-start after pausing: Press the PAUSE button. WARNING: THE TREADMILL BELTWILL RESUME AT THE SPEED THE TREADMILL WAS MOVING BEFORE PAUS-ING.! Countdown Time, Preset Speed and/or Incline: Time, Speed, and Incline may be preset prior to get-ting started. After pressing the POWER button, the time window will blink. Use the SPEED + or –arrows to select your workout time, then press the ENTER PROGRAM button. The SPEED win-dow will now be flashing. Using the same + or – arrows, select the speed for your workout, thenpress ENTER PROGRAM. Now the INCLINE window will be flashing. Use the INCLINE + or –arrows to set your workout incline, then press ENTER PROGRAM. To start, press theSTART/STOP button.10Program and Operating InstructionsENTERSTOP/START POWERPAUSEINCLINE SPEED/TIME