KPCI-3101 — KPCI-3104 Series User’s Manual Installation and Configuration 3-19Connecting analog output signalsFigure 3-10 shows how to connect an analog output voltage signal (channel 0, in this case) to theSTA-300 screw terminal panel using an external +10V reference.Figure 3-10Connecting analog output voltages using an external +10V reference(shown for channel 0)If you do not connect the Analog Output Reference to TB21, the board provides an internal+10V reference, as shown in Figure 3-11.Figure 3-11Connecting analog output voltages using the board’s internal +10V reference(shown for channel 0)STA-300 PanelTB19Analog Output 0Analog Output 0 Reference TB20Load Analog Output 0 ReturnTB21V Ref+10V−10VSTA-300 PanelTB19Analog Output 0TB20Load Analog Output 0 ReturnTB21KPCI-3101–4 SeriesDAC0+10V Reference10kΩ
