Menu
Keating Of Chicago TOP-SIDE PRE-2005 series User Manual
                  | |
| keatingofchicago.comTHE TOP-SIDE™ COOKING HEAD AND GRIDDLEPLATE ARE HOT - USE PROPER CARE WHENCHANGING THE COOKING SHEETS.LEVELING OF COOKING HEAD(S)The Cooking Heads were leveled at the factory.NOTE: For best results, level griddle before checking.Adjust legs or stand casters to level griddle.REMOVAL OF COOKING HEADNOTE: To identify parts, refer to page 10.1. Turn off griddle and disconnect Top-Side™ Cookerelectric power.2. Remove the cooking sheet by lifting off cookingsheet mounting clips.3. Place a layer of soft cloth and then a layer ofcardboard onto griddle plate under cooking head toprotect Miraclean® surface.4. Raise cooking head completely to release tensionon cooking head support pin. Remove support pinand its cotter pin and carefully lower cooking head toprotected griddle surface.The cooking head is not supported after the cook-ing head support pin has been removed. If droppedthe weight of the cooking head when unsupportedwill cause damage to the griddle surface or injury topersonnel.5. Do not turn the support pin in either direction.6. To reattach the cooking head to the ram lift arm,raise cooking head completely and replace cookinghead support pin. Insert a new stainless steel cotterpin to secure support pin, holding support pin tokeep it from spinning.7. Replace cooking sheet. See - “Installing a CookingSheet”. SERVICE DIAGNOSISA properly adjusted Keating Top-Side™ Cooker, withno load, will cycle “ON” approximately every 5-1/2 to6-1/2 minutes. Each cycle will last 40 seconds, ensur-ing that the temperature setting is held within a narrowrange.6 |
Related manuals for Keating Of Chicago TOP-SIDE PRE-2005 series
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved