Menu
Kanguru KCLONE-7HDS-PRO User Manual
                                                             | |
Contents
| 
406.1.28 Skip read ErrorThe Skip Read Error option allows you to enable or disable error skipping during Disk, SMART,Brief and Resize modes.Tap the ‘ENT’ button to change this option.• [ ] – Disabled (default). When an error is detected while reading from the Source, the duplicatorprocess will fail out.• [ ٭ ] – Enabled. When an error is detected while reading from the Source, the duplicator willskip the bad sector on the Source and fill the sector with zeroes on the Target.6.1.29 No button SoundThe No Button Sound option allows you to enable or disable the audible tone that sounds when youtap or hold a button.Tap the ‘ENT’ button to change this option.• [ ٭ ] – Button sounds are disabled. No audible tones will sound when you tap or hold a button.• [ ] – Button sounds are enabled (default). Tapping a button will be accompanied by a shorttone. Holding a button will sound a low tone followed immediately by a higher pitched tone.6.1.30 Keep LED resultThe Keep LED Result option allows you to configure whether the LED status lights remain on aftera duplication completes.• [ ٭ ] – LED Status lights from the previous duplication will remain on until the next duplicationprocess is started.• [ ] – LED Status lights reset after duplication completes (default). After the duplicationcompletes and you exit from the completion screen, the LEDs will reset.The Setup Menus |
Related manuals for Kanguru KCLONE-15HDS-PRO
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved