Menu
Kanguru KCLONE-7HDS-PRO User Manual
                                                             | |
Contents
| 
336.1.8 Source Power offThe Source Power Off option allows you to configure whether the system turns off power to theSource drive after a process is completed.Tap the ‘ENT’ button to change this option’s setting.• [ ] – Source Power Off is disabled. The system will keep the Source drive powered on after aprocess is completed.• [ ٭ ] – Source Power Off is enabled (default). The system will shut off power to the Sourcedrive after a process is completed.6.1.9 Erase Source PortThe Erase Source port option allows you to configure whether the system erases the disk connectedto the Source port when running Quick Erase, Disk Erase or Disk Wipe.Tap the ‘ENT’ button to change this option’s setting.• [ ] – Erase Source Port is disabled (default). A drive connected to the Source port will not beerased if you run Quick Erase, Disk Erase or Disk Wipe.• [ ٭ ] – Erase Source Port is enabled. A drive connected to the Source port will be erased if yourun Quick Erase, Disk Erase or Disk Wipe.6.1.10 Verify Source CheckThe Verify Source Check option allows you to configure whether the system checks the Source’sCRC to ensure that the source data is healthy before starting a copy process.Tap the ‘ENT’ button to change this option’s setting.• [ ] – Verify Source Check is disabled (default). The duplicator will not check the Source’sCRC before a copy process.• [ ٭ ] – Verify Source Check is enabled. The duplicator will check the Source’s CRC and ensurethe source data is healthy before starting a copy process.The Setup Menus |
Related manuals for Kanguru KCLONE-15HDS-PRO
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved