Menu
Kabola B-8 User Manual
                    | |
Contents
| 
User manual Kabola B-serie, 1-4-2005 6Figure 13. Transport and storage3.1 TransportTake following precautions before transporting the boiler:• Drain the water from the boiler• Uncouple the fuel system• Remove the burner (see 4.1.5, replacing the burner)While transporting the boiler, take following precautions:• Don’t damage the boiler, use a blanket to cover the boiler.• Transport the boiler lying down on its back• For the boiler models B-25 onwards use the hoisting eye to move the boiler. This hoisting eye islocated below the top of the boiler cover.3.2 StorageTake the following precautions when the boiler is stored for a longer period of time:• Store the boiler and accompanying parts in a dry place.• Dismount the burner• Store the boiler standing up.• Store the boiler on a firm horizontal base.4 Installing and preparing for first useIn this chapter you will find directions and hints for a correct placement and fitting of the boiler andaccompanying parts.Warning: Don’t store any flammable and gaseous substances in the room where the boiler isinstalled. This is to ensure that no explosions or fires can occur.4.1 Installation4.1.1 Fitting the boiler• Install the boiler in a dry place.• Install the boiler on a firm horizontal base.• Make sure there is sufficient supply of fresh air in theroom where the boiler is installed (see hint below)Hint: As a rule of thumb for the ventilation openings, take 2,5times the diameter of the flue gas outlet.• To avoid movement secure the base of the boiler bymeans of spotwelds or with nuts and bolts.• Keep a minimum distance of 250mm behind the boilerfor the flue-gas outlet (see figure 1) |
Related manuals for Kabola B Series
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved