KENT MAXX Instruction Handbook For Installation, Operation And Maintenance

Contents

KENT MAXX Instruction Handbook For Installation, Operation And Maintenance Manual pdf 6 page image

Cleaning the Water TankOpen the Upper Cover Remove the water tank Clean it under a runningtap water and wipe drySwitch off the power supply.Recommended Frequency for Filter/membrane ChangeSediment/Carbon à Once every year or earlier if gets cloggedUF Membrane à Once every 6 months or earlier if gets cloggedTechnical SpecificationsMaintenanceTo ensure that the purifier operates at its BEST, a routine maintenance must be performed.The frequency of the maintenance will greatly depend upon the raw water quality andconsumption of purified water.Storage tank must be cleaned once in a week. (Refer Cleaning the water tank Pg. 8)In the event of not using purifier for more than two days (while going on a holiday, touretc.), turn off the raw water supply and drain the storage tankReplace sediment filter and carbon filter once in 12 monthsReplace UF membrane once in 6 monthsnnnnThe replacement time of consumables such as filters and membrane is dependenton the quality of raw water and water consumed.Starting up the purifiernnnnnnnSwitch on the power supply residual dust particles initially presentin the pipes and storage tankAllow the storage tank to fill up to theMaximum level Place back the storage tank and closethe upper coverSwitch off the power supplySwitch on the power supplyOpen the upper cover. Lift and drain thestorage tank so as to remove the Purifier is ready to useNote: The glowing Red LED indicates the power is on. The glowing Green LEDindicates the purification process is on.7. Allow the filters to pre-soak in water for 2-3 minutes.8. Connect the power supply.9. Installation is complete.87Ideal for Tap/Municipal water supply.7L20.3 kg/cm or 4.267 psi / 10ºC0.1 Micron11WattApplicationsMax. Purification Production RateBody MaterialInstallationDimensions (mm)Filter CartridgePurified Water Tank CapacityInlet Water Pressure/Temp (min)WeightUF Membrane Pore SizeUV Lamp Wattage60L/hr. (depending on inlet water pressure)ABS Food Grade PlasticWall Mounting/Counter-Top390 (L) x 285 (W) x 400 (H)Sediment, Activated Carbon, UF6.100 kg23 kg/cm or 42.67 psi / 35ºCInlet Water Pressure/Temp (max)11013Model No.MODEL NAME KENT MAXX24V DCVoltage Output of SMPSInput Power Supply 100-300 V AC, 50-60 HzOne YearLife of UV LampWater Purifier With Ultra Violet DisinfectionProduct

/ 6

Related manuals for KENT KENT MAXX