KBC WES2HT Series User Manual

Contents

KBC WES2HT Series User Manual Manual pdf 30 page image

WES2HT User ManualManual-WES2HT-Rev1407-1Copyright © KBC Networks 2013 Page 29 of 142 www.kbcnetworks.comPin out for color codes 568-A and 568-B:568-A 568-B1- Green/White 1- Orange/White2- Solid Green 2- Solid Orange3- Orange/White 3- Green/White4- Solid Blue 4- Solid Blue5- Blue/White 5- Blue/White6- Solid Orange 6- Solid Green7- Brown/White 7- Brown/White8- Solid Brown 8- Solid BrownA cable configured with the 568-A color code on one end and the 568-B color code onthe other end is an Ethernet standard crossover cable.8.3 Disconnecting the Cable from the External LANPort.When the system must be removed from its mounted position for servicing and theEthernet cable must be removed from the RJ45 port, follow these steps:1. Loosen the strain relief (see warning note above in section 8.1, step 4).2. Using a small flathead screw driver (or something flat and long, or even the longflat portion of a pen cap), depress the RJ45 tab that secures the connector intothe port. Do not attempt to remove the cable without depressing in the RJ45connector tab or the port will get pulled loose from the housing.3. At this point the cable can be removed from the RJ45 port.