Menu
KAUP 3,5T351.2 Operating Manual
                      | |
Contents
| 
Operating ManualOriginal Operating Manual 114.2 Checking outKAUP-attachments are delivered pre-lubricated. If the attachment has been in storagefor a longer period, we recommend that it be lubricated again before being placed inservice. See 6. Maintenance and onwards.Failure of the safety devices (e.g. the pressure relief valve and the non-returnvalve) and incorrect connection of the controls to the actuators can causemalfunctioning of the attachment and damage to it.After mounting and before initial operation, check the functions and theidentification of the attached equipment with the movement directions of theoperating elements (operating lever, joystick, etc.).4.2.1 Bleeding the hydraulic system Start the lift truck. Move the sideshifter repeatedly in both directions to maximum extent. Rotate the rotator left and right several times. Inspect the hydraulic connections for leakage.4.2.2 Adjustment after putting into serviceThe hydraulic system is under pressure. During work on hydraulic componentsoil spurting out can cause injuries. Unload the system in accordance with theoperating instructions of the lift truck manufacturer. In the case of injuriescaused by high pressure oil, inform the works physician and seek out aspecialist immediately.5. Operation5.1 GeneralAt least once per working shift, the machine and equipment must be inspected forvisible damage and defects.Repeat faults to your superior and have them rectified without delay.Be aware of persons present in the area where you are working or driving and ensurethat they are not endangered.Do not transport any load exceeding that specified on the residual load plate for theparticular combination of lift truck and attachment. |
Related manuals for KAUP 3
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved