KMD14.2/16.2.2A/14.2AAudio mixing consoles with 24-bit digital multi effects processorsSwitchable low cut filter on all mono channelsFX sends (post) per channel for internal or external effects and monitoringMaster aux sends with gain control and PFL / Aux sends (pre/post) per channelMute/Alt 3-4, solo-in-place and pre-fader-listen function on all channelsSeparate main mix, Alt 3-4, control room and headphone outputs2 track inputs assignable to main mix or control room/headphone outputsHighly accurate 12 segment barograph metersHigh quality 60mm faders and high quality sealed potentiometers99 preset effects digital processor with 24bit DSP, sampling rate: 31.25kHzBlue LCD for signal level & effects full name and parameter displaySoft start, DC, AC short circuit, clip limiter, thermal cut, power limiterM A N U A L V E R S I O N 1 . 00 6 . 0 6 . 2 0 1 0For the latest instruction manual updates and information on the entire Kam range visit:www.kam.co.ukKam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJTelephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.comIf this product is ever no longer functional please take it to a recycling plant for environmentally friendly disposal.Due to continuous product development, specifications and appearance are subject to change.© Copyright Lamba plc 2010. E&OE.Two powered and one passive model availableKMD14.2A - 14 channel powered mixerKMD16.2.2A - 16 channel powered mixerKMD14.2 - 14 channel mixerUltra low noise mic preamps with +48V phantom powerAdditional multi-functional stereo channelsSwitchable 7 band graphic equalizer for ultimate main mix equalizationAlt 3-4 bus routable to main mix and control room with insertExtremely high headroom offering increased dynamic rangeBalanced inputs and main outputs for high signal integrity4 band EQ on stereo channels and 3 band EQ on mono channels